Black.Infinity
Apr 10, 02:47 AM
What about the UPC codes, would I need them if I wanted to bring the computer into an Apple Store or something?
They just need the serial number on the back of your laptop
You can find the serial number on the back or in the system profile
They just need the serial number on the back of your laptop
You can find the serial number on the back or in the system profile
bmcdx
Apr 15, 08:18 PM
So I have Outlook 2011 running fine with my Exchange 2007 account. But I'd like to be able to add another Exchange 2003 account, but this crappy old exchange account doesn't use RPC/HTTPS - it's only available via OWA. Is there anyway to do this?? Doesn't need to be as functional as the 2007 account, I just want to be able to receive the email, and be able to reply from my exchange 2007 account. I should say the exchange 2003 account I can access from my ipad if that helps... any thoughts??
tdfreeman
Apr 22, 11:39 AM
Thanks, guess I'll put it on Craigslist for a bit.
Is it an either or situation? I've been around 5 months, but it'll take me 10 years to get 500 posts as I'm more of a lurker.
Is it an either or situation? I've been around 5 months, but it'll take me 10 years to get 500 posts as I'm more of a lurker.
jbyun04
Feb 17, 03:03 PM
use media queries and meta viewport
giulianoaugusto
Apr 28, 10:59 AM
Is the Gevey sim reliable? Will my 3G connection work with it?
Daveway
Sep 28, 09:45 PM
I'm kinda new to web design and I need help with something.
I made one of the flash photo galleries that CS2 makes. I want to get it into an already made html page. However, I can't seem to do this because the .swf file needs all these other files that PS made to go with it.
How would I do this? A frame?
I'm using GoLive btw.
thanks.
I made one of the flash photo galleries that CS2 makes. I want to get it into an already made html page. However, I can't seem to do this because the .swf file needs all these other files that PS made to go with it.
How would I do this? A frame?
I'm using GoLive btw.
thanks.
redandwhite
Mar 21, 02:05 PM
If it's an evening launch I'll be there!
WildCowboy
Oct 20, 01:56 PM
Simple, but very cool. An Apple font would have been nice, but it's very good!
alph45
Apr 18, 11:26 AM
not easily done if you don't know what your doing, and even then results may vary.
Typically a product like Soundsoap would be used, but this works best on consistent sounds (machinery hum, camera noise). A "beep" needs to be isolated. On a graphics equalizer the sound should be in the upper range while the human voice is in the mid's. Using any decent audio program or even FCP bring the upper levels down to try and reduce the sound. Taking out the highs entirely though will produce a distorted speaking voice and this approach is in general going to produce rough results unless you know what your doing.
An audio specialist can work magic (i'm not) and can for example, recreate the highs that have been filtered out or just isolate the beeps with good frequency analysis, but this is rapidly leaving my area and certainly your software.
Typically a product like Soundsoap would be used, but this works best on consistent sounds (machinery hum, camera noise). A "beep" needs to be isolated. On a graphics equalizer the sound should be in the upper range while the human voice is in the mid's. Using any decent audio program or even FCP bring the upper levels down to try and reduce the sound. Taking out the highs entirely though will produce a distorted speaking voice and this approach is in general going to produce rough results unless you know what your doing.
An audio specialist can work magic (i'm not) and can for example, recreate the highs that have been filtered out or just isolate the beeps with good frequency analysis, but this is rapidly leaving my area and certainly your software.
macgeek2005
Apr 17, 01:04 AM
whaa??? explain everything. I didn't understand a word of your first post.
Roeltjah
Apr 15, 01:13 PM
Well, let's all click our software update and download the new update :-) I wonder what's changed...
daneoni
May 6, 08:42 PM
Your looking at a wrong site. HE prices are still intact.
aeaglex07
Apr 7, 09:04 AM
lion is indexing every time i reboot on 2010 mbp.
wrldwzrd89
Feb 14, 04:49 PM
Apple recently upgraded their Java VM to 1.4.2 in OS X. But there is one "catch"- it can only be accessed through WebKit. This means only Safari can use the new Java! Other browsers (like Firefox) are stuck with 1.3.1, a very old version.
Does Apple have plans to fix this? This seems like a major drawback in OS X.
I agree that it's a stupid idea on Apple's part. I think Apple should not only fix this issue, but also eliminate the whole dual Java install thing - hopefully they'll do this with Tiger and make Java 5 the ONLY Java version on Mac OS X 10.4 "Tiger", accessible to all applications equally. While they're at it, QuickTime for Java needs to be fixed so that Java updates don't keep breaking it :mad:
EDIT: spelling
Does Apple have plans to fix this? This seems like a major drawback in OS X.
I agree that it's a stupid idea on Apple's part. I think Apple should not only fix this issue, but also eliminate the whole dual Java install thing - hopefully they'll do this with Tiger and make Java 5 the ONLY Java version on Mac OS X 10.4 "Tiger", accessible to all applications equally. While they're at it, QuickTime for Java needs to be fixed so that Java updates don't keep breaking it :mad:
EDIT: spelling
Mr. Anderson
Sep 17, 10:22 AM
Well, I really do feel your pain.
It took 3 weeks for my TiPB to be built and shipped last October. Since its came out of Taiwan, it takes a while, even if you get faster shipping. And I had to get another TiPB from Apple because the 1st one was stolen off the docks at FedEx! So after all the investigation and back and forth between Apple and FedEx, a new one was ordered and I eventually got it in December.....not fun!
D
It took 3 weeks for my TiPB to be built and shipped last October. Since its came out of Taiwan, it takes a while, even if you get faster shipping. And I had to get another TiPB from Apple because the 1st one was stolen off the docks at FedEx! So after all the investigation and back and forth between Apple and FedEx, a new one was ordered and I eventually got it in December.....not fun!
D
ftaok
Apr 29, 06:23 AM
hey guys. I searched around and couldn't find a post with this.
My xbox360 just died yesterday.. and since PSN is still down.. I want to watch netflix on my tv. I have the 2011 MBP.. and the HDMI adaptor. I can get video and audio to my tv without a problem. Now, is there anyway to make the output to 16:9 for my tv? When I made netflix full screen.. it cut off top part of Safari.. and the bottom part.
Any answers?
This should be a slam dunk, but a lot depends on your TV.
Make sure you select the appropriate screen resolution for your TV. Snow Leopard has 1080p and 720p selections. Second, make sure you correct for overscan. Your TV may have the ability to do 1:1 pixel mapping. On my Sharp, I use the "format" button to toggle through the settings. There is also an overscan button in the Display preference on the Mac, that could help too.
My xbox360 just died yesterday.. and since PSN is still down.. I want to watch netflix on my tv. I have the 2011 MBP.. and the HDMI adaptor. I can get video and audio to my tv without a problem. Now, is there anyway to make the output to 16:9 for my tv? When I made netflix full screen.. it cut off top part of Safari.. and the bottom part.
Any answers?
This should be a slam dunk, but a lot depends on your TV.
Make sure you select the appropriate screen resolution for your TV. Snow Leopard has 1080p and 720p selections. Second, make sure you correct for overscan. Your TV may have the ability to do 1:1 pixel mapping. On my Sharp, I use the "format" button to toggle through the settings. There is also an overscan button in the Display preference on the Mac, that could help too.
rogerthatmarc
Jul 21, 01:09 PM
I have not been able to get any mobileme control panel release to work with Outlook 2010 x64, any idea if this release is compatible?
CreativeCrayon
Mar 13, 06:39 PM
lol yeah, so the thing is. i bought this mac on ebay in 2008 i think, it came with leopard preinstalled and it did not come with restore disks or install disks, so i think im stuck getting a new hard drive and a leopard disk....
Bill McEnaney
Apr 29, 01:14 PM
Everyone,
This thread is about name-calling that conservatives, moderates, liberals, and others do. Please feel free to point out any example of public name-calling, especially public name-calling that conservatives have done. I say "public name-calling" because I'm thinking mostly about public figures. I would hate to hear anyone, including me, libel, slander, detract, or calumniate anyone. Name-callers may have committed any sin I've just described. But my purpose in't to name-call in the words public figures use. It's to point out evil, so we can fight it. This discussion is about actions, not about any name-caller's motives for name-calling.
Bill
This thread is about name-calling that conservatives, moderates, liberals, and others do. Please feel free to point out any example of public name-calling, especially public name-calling that conservatives have done. I say "public name-calling" because I'm thinking mostly about public figures. I would hate to hear anyone, including me, libel, slander, detract, or calumniate anyone. Name-callers may have committed any sin I've just described. But my purpose in't to name-call in the words public figures use. It's to point out evil, so we can fight it. This discussion is about actions, not about any name-caller's motives for name-calling.
Bill
dilgit
May 3, 01:39 AM
Are you sure? When I open disk utilities and check my SSD hd it does not see the 64GB partition that Windows 7 uses. So how will it recognize it on the external hd?
olindacat
Apr 15, 09:33 AM
Is it smart buying a new Mac RAID card to have RAID 5 in a new MP w/4x3TB drives and NEC 27" display if I am doing video editing, today, or save the $ on the MP, and card, and use (instead) either an iMac with eSATA card rigged for external RAID or a MacBook Pro w/Thunderbolt somehow connected to what doesn't exist until summer? Or, should I wait for iMac refresh??? I need machine ASAP, but suppose I could get quad interface and suffer w/FW8 until TB comes online. What to do? Any ideas?
LimeiBook86
Aug 20, 04:19 PM
That is so cute! Your current avatar is nice too :)
Thanks :)
Thanks :)
David Schmidt
Aug 20, 03:47 PM
I've tried several cheap SCSI->IDE plugged into IDE->CF solutions, and all seem to fail on older macs when I go to partition and format. I have yet to find classic Mac software that will successfully do that step. I can see the "drive," and some seek-ish stuff works, but partitioning it always seems to fail with one of those cryptic numerical error messages.
I've had good luck with IDE->CF solutions in later PowerMacs that have internal IDE busses; that seems to work just fine.
I've had good luck with IDE->CF solutions in later PowerMacs that have internal IDE busses; that seems to work just fine.
waqasmu
May 2, 06:26 AM
i have i-phone4 , OS is 4.2.1 i accidentally updated it n now getting no carrier problem..
No comments:
Post a Comment